HorizonTV Featuring ProRemodeler: Watch Episodes On Demand At HorizonTV

Writing Specs Right

Project specification documents have a big impact on a remodeler’s profit. Follow these guidelines to make sure they’re detailed, clear, and accurate. 

December 04, 2017
example of specifications for a remodeling project by Otagawa-Anschel Design+Build

In some cases, specs are separate documents detailing product choices and installation practices. In other instances, the remodeler will put as much product info as will fit on the blueprints. This example is from Otogawa-Anschel Design+Build, in Minneapolis. 

A set of detailed project specifications, or specs, save time, money, and aggravation by ensuring that everyone works off the same page. They show clients exactly what to expect, and they make pricing more accurate. 

Remodelers who write detailed specs couldn’t imagine working without them. “Costs on our last 35 jobs were within 0.82 percent of estimate and our change orders are consistently just 2 or 3 percent of annual volume,” says Paul Eldrenkamp, owner of Byggmeister, a design/build firm in the Boston area. He adds that it’s his company’s detailed specs that have made the difference.

So why do so many remodelers fail to write good specs? The answers include misunderstanding about how to do them right and concern that putting in enough detail will take too long. 

How Do You Write Good Specifications for a Project?

Effective specs encompass every important feature and product on the job. Remodelers new to spec writing usually start small by defining critical products for client approval and processes that they need workers to do a certain way. 

“Good specs don’t have to be long,” says Michael Anschel, principal of Otogawa-Anschel Design+Build, in Minneapolis. “But,” he adds, “they do need to include the critical components you need people not to screw up.” It’s important to provide a lot of detail in those areas, such as plumbing and electrical work. For example, some remodelers merely write “electrical to code,” and list the type and color of switches and outlets on the plans, figuring that’s enough information. But that can lead to problems down the road. “If you specify a light switch with no additional information, you risk having the customers get upset when you tell them that the stainless steel outlet covers they want are going to cost an extra $4 apiece,” Anschel says. (Note: Effective specs encompass every important feature and product on the job. Here, Otogawa-Anschel Design+Build  provides enough detail to avoid misunderstandings with the homeowner, reduce change orders, and clarify a number of procedures for employees and trades. Click on the image, above, to see a full-size sample spec from Otogawa-Anschel Design+Build. ) 

A better spec, he explains, would be something like, “Four almond-colored duplex GFCI receptacles installed in a vertical orientation with white plastic outlet covers.” If the customer wants an extra outlet or a different type of cover, it’s clear that they need to get a change order from you.

Or take the example of bathroom plumbing fixtures. 

A vague spec for a master bath might
be as follows:

Sink type: Kohler vanity sink
Sink color: Beige-white
Faucet: Delta
Faucet finish: Standard
Dimensions of sink placement in countertop: Centered

A better spec would be:

Sink: Kohler Tresham K-2979-8-0 vitreous china vanity top with integral sink
Vanity top height: 32 inches above the finish floor
Color: Biscuit
8-inch center faucet holes
$400 allowance for bath fixture
Sink location will be per cabinet plan on page P3 of the blueprints

“You want to write the spec so the owners can’t argue with you about what sink to use or where to place it,” says Dennis Dixon, a remodeler, author, and consultant based in Flagstaff, Ariz. 

Specs are also helpful in setting expectations for subcontractors. A set of standard practices for your trades will spell out critical details on every project. These may include visuals to help installers correctly complete critical parts of the job, such as instructions from the DuPont website on how to flash a window and integrate it with the Tyvek housewrap, says Doug Horgan, VP of best practices with BOWA, in McLean, Va. “Rather than just specifying the type of window flashing, we include the drawings to show how we want it done,” he says. Specs can include instructions that tell trades how you want things done. BOWA has a 63-page Trade Standards document (below) that includes sections for carpenters, roofers, insulators, plumbers, electricians, HVAC installers—even the companies that install fire sprinklers and central vacs. 

BOWA remodeling company trade standards document-coverIt’s especially important to clearly define any one part of the job that will affect another. For instance, Shawn McCadden of RemodelMyBusiness.com, an industry trainer and former remodeler, points out that if you want the flooring of an addition to seamlessly meet that of the existing home, the height of the subfloor will depend on whether you are using ¾-inch strip oak or ¼-inch-thick engineered flooring. Getting the subfloor right will be easier if you pour the foundation at the right level. “If you don’t define the kitchen flooring before pouring the foundation, how do you know what height to pour the concrete?” McCadden asks.

On the other hand, there’s usually no need to define construction details where the workers understand company expectations. If your carpenters know how to correctly install sheathing, you probably don’t have to call out details such as nailing patterns.

It’s a good idea to orally review your specs for construction details with new subcontractors. For example Anschel’s roofing specs require metal drip edge along all roof edges, something most roofers in his area don’t automatically install because it’s not required by local codes. If the roofing sub sends a crew that hasn’t worked on one of his jobs before, the job supervisor reviews this requirement with them.

You can present this information in whatever way suits your business. Some remodelers put details on the blueprints, including model numbers of plumbing and electrical fixtures. Others put most of this detail—from concrete and framing lumber to cabinets, hardware, wall paint, and roof shingles—on separate documents. 

“Although I put a lot of information on my drawings, I create separate, very detailed schedules for lighting and plumbing fixtures,” says Doug Walter, a Denver architect who works exclusively with remodelers. 

If the clients already have a design, then meeting with them and the subs on site and writing an estimate with detailed specifications should take between 10 and 16 hours for a major kitchen remodel and maybe 4 hours for a 30-square-foot bath, McCadden says. He adds that the time is an investment rather than a cost. “Ask yourself: Will it take longer to do this work right or to be constantly answering questions and correcting mistakes?”

Done right, this work also gets easier with each job. Dixon is author of Finding Hidden Profits: A Guide for Custom Builders, a subject he lectures on at industry events nationwide. He hears lots of concern about how long writing a thorough spec will take. “Contractors at my seminars all agree on the importance of good specs but complain they lack the time to write them,” Dixon says. However, he points out that while the first set of specs can take some time to prepare, you’ll be able to reuse a lot of the information and, ultimately, you’ll create boilerplate language you can use again and again. “Start with the spec for a small kitchen or bath,” Anschel advises. “You may end up with four or five pages that become a template you can customize for other jobs.” As a bonus, you’ll have started with the most complex parts of the house, so the other rooms will generally be easier. 

It's a good idea to keep a copy of your specs in one place at the jobsite. Trades can take a photo of details that pertain to them and clients can review them as well. 

Boilerplate specs tend to be a work in progress, with most remodelers refining and adding to the documents over time. “If the electrician always has to ask you how high above the kitchen island you want the three pendants,” Anschel says, “start including that dimension.” He adds that one client put a level on the garage slab and asked why it wasn’t level. His crews know that a garage slab needs a ⅛-inch slope, but Anschel added it to his garage specs, in case another client asks in the future.

There may be as many different types of boilerplate template as there are remodelers, but they tend to fall into two broad categories. Dixon’s approach is one: He uses the spec documents from a previous, similar job as a template on each new job. He then handwrites any changes on a printed copy and types those into the new document. 

The other approach is represented by McCadden. During the years when he ran a full-time remodeling business, McCadden created stored templates for common jobs. He also created a library of boilerplate passages for specific tasks and saved them so they could be inserted in the templates as needed.  

About the Author

About the Author

Charlie Wardell is a freelance writer and former remodeler in Tisbury, Mass.



Great article Charlie. I'm home owner, about to remodel a bath. Are there any free software out there that can help a DIY with either cost or design? Thanks for any suggestion.


Would love to get the examples of the spec's that are included in this article, is it possible to reach out directly to the author? We are unable to read the PDF as the font is too small.


Hi Julie, If you click on the "View" dropdown menu at the top of your browser, you should be able to enlarge the PDF for easy viewing. In the meantime, we'll check with the article's sources about access.   

The Construction Specifications Institute (either in the USA or Canada) has good outlines on spec writing. Their "Section" and "Page" formats are constructed to "Standardize" the elements involved so a contractor can get to the information he/she needs quickly and reference them to the relevant drawings. Clear, Concise, Correct, Complete are the 4 "C"s of good spec writing. The hitch is: you must know what it is your are trying to be clear about which is where homeowners and many contractors have problems. There are "canned" specifications such as: MasterSpec (tm) ; but nothing can replace experience on the job and training in the field where most homeowners will, naturally, fall short. They do not do this for a living. Moreover, and this is experience speaking, most people feel all this "paperwork" is a waste of time. Why don't you just "do it"? Well, there is hindsight! How much does it cost to do it over?

Add new comment

Overlay Init