flexiblefullpage - default
interstitial1 - interstitial
Currently Reading

Lighting: Theory Meets Practice

Advertisement
billboard -

Lighting: Theory Meets Practice

Real-world footcandle readings shine a light on the importance of recessed fixture size, lamp type, and fixture location


By By Doug Walter March 2, 2018
computer lighting model
This article first appeared in the March 2018 issue of Pro Remodeler.

In my May 2017 article, “Recessed Reconsidered,” I made the case that the conventional wisdom of laying out kitchen lighting is mostly wrong. It appears everyone is designing by eye instead of checking results, which you can easily do with a smartphone and light meter app. I had collected preliminary data for my clients’ remodel, which was ongoing at the time, and my article charted our test results with the cans located at 24, 30, 36, 42, and 48 inches out from the wall. My conclusion was that, with can lights centered more than 24 inches out from the wall, it is virtually impossible to deliver anything close to the minimum 50 footcandles NKBA recommends, particularly with a cook standing there and blocking the light.

My clients’ remodel is now complete, and I went by this summer to compare theory to reality. I also did a post-occupancy measurement of delivered footcandles (fc) on a major kitchen redo that I had modeled on computer. In both cases, the data, resoundingly supported earlier evidence-based lighting theory that the light level at the work surface depends on three factors: the fixture, the lamp, and especially the fixture location.

Mike and Holly’s Kitchen

The bungalow kitchen in my earlier article received a minor makeover—taking down the wall between kitchen and dining room, installing new countertops, and adding a bunch of can lights to supplement the lonely surface-mounted ceiling light fixture. I visited Mike and Holly a couple of months after the remodel, and while sitting in the dining room, I was bothered by glare coming from the new recessed cans in the adjacent kitchen 15 feet away. I also noticed that the light quality was bland, without any highlights.

Before and after photos show how light levels in this Denver bungalow remodel by Parkside Remodeling and Doug Walter Architects were vastly improved by removing the wall between the existing kitchen and the family room, and installing a completely new lighting scheme.

Taking out my light meter, I found that the lamps the electrician had installed were only delivering 15 fc to the work surface, far below what I had planned. He’d substituted BR30 floods for the PAR30 floods I’d specified, probably because they were cheaper and more readily available.  Luckily, I had a case of PAR30’s in my car, and when I installed them and took another meter reading, it showed 158 fc on the counters! Same lumens (900), same wattage (11), but 10 times the delivered footcandles! Plus, the quality of light was much more pleasant, with very little glare and more of a difference between the counters and the walls.

Do Mike and Holly run their cans at 158fc? I doubt it—that’s what dimmers are for—but it’s nice to have it when you need it. Is 158 fc too much? Not when you compare it to daylight pouring in through the windows.

I repeated my lamp and fixture location experiments at another ongoing remodeling project with the help of my colleague Jeni Finnigan, an occupational therapist with an interest in home modification around lighting. After hearing about the relamping at Mike and Holly’s, she decided to relamp the cans in her own kitchen. The results (see “PAR Instead of BR,” above), show “before” light meter readings with BR30 floods and “after” readings with PAR30 floods that are three to five times higher. Though not as dramatic as Mike and Holly’s results, the layout of lights in Jeni’s kitchen is not ideal and in many locations you work in your own shadow. We discussed further improvements, such as the undercabinet LED tape light she installed to the left of the sink, which by itself adds 10 fc.

Location Matters

Bulb type can obviously make a huge difference in how much light actually makes it to the surface of a kitchen countertop, but even the biggest brightest bulb can be ineffective if the fixture isn’t properly located. After changing the bulbs in Jen’s kitchen, when I took measurements while she was standing at the counter my readings returned to their original levels—12 fc at the range and 8 fc to the left of the sink.

The tracing (see “Typical Textbook Lighting Design,” below) is typical of what kitchen designers find in lighting textbooks. I scaled the drawing, assuming the edge of the countertop is at 25 inches, and found that the can lights are located more than 50 inches from the wall—well beyond the 24 inches my research indicates is ideal. 

To confirm my theory, I took before and after measurements on several subsequent remodeling projects, which gave me comparative data on light levels under real-world conditions. In one project, the data clearly show that relocating the cans to 24 inches yielded the best results by far in the situation that matters most—when a cook is standing at the counter (see, “Right Fixture, Right Location,” above right).

A second, much larger project confirmed these results, and also gave me an opportunity to compare light levels as predicted by computer modeling with actual light levels measured at project completion (see “Theory vs. Practice,” below right). In this case, the original lighting plan was an almost mathematical grid of 6-inch cans equipped with BR38 lamps that generated an average of about 15 fc at the countertops. After redesigning the kitchen, including the island, we created a new lighting plan that called for 5-Inch cans with PAR30 floods. The results are pretty convincing, although I was only able to achieve 70 fc at the island. I plan to swap in S or NS (spot or narrow spot) lamps in this location to see if they will boost light levels nearer to my goal of 100 fc. 

Now What?

There is still work to be done. For instance, my experience has been that  3- and 4-inch-diameter cans can’t deliver the lighting levels I want, so I have been using 5-inch cans in 8-foot ceilings. Recently, however, I have learned that dedicated LED light engines put out a lot more punch than medium-base fixtures equipped with screw-in LED bulbs, and also have double the lamp life. I am planning to gather data from working jobsites using smaller-diameter cans and various lens combinations to see what’s possible. 

I am also currently collecting data to document the effects of layered light. But the point of all this is to show that good lighting design is neither art nor science, but a combination of both. Design-by-the-numbers alone won’t consistently create light levels that positively affect mood and well-being; good lighting design still requires an artist’s touch.



Add new comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and email addresses turn into links automatically.
  • Lines and paragraphs break automatically.
  • CAPTCHA

    This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.

Related Stories

AnotherStory: Revamping the Second-Story Addition

An architect and remodeler are marketing a new method for completing second-story additions

How to Replace a Window (Part 2)

This time it’s in a fat wall wrapped with a housewrap air barrier and exterior rigid insulation

To Vent or Not to Vent a Home?

The Model ReModel 2022 remodeler must make a decision for the net-zero accessory dwelling unit

3 Pro Tips for Insulating Foundation

Symbi Homes builds and remodels green from the ground up at the Model ReModel 2022 project, the Regeneration House

Using XPS to Insulate Foundation

Symbi Homes plans to achieve several green certifications for its remodel of a 19th-century Victorian, our Model ReModel 2022 project.

Siding Restoration on a Historic Home: Part 1

In order to give our Model ReModel 2022, a 19th-century Victorian, a proper facelift, the Symbi Homes team opted to repaint in a new palette. The age of the home required a specific approach to manage lead paint and historical requirements.

The New American Remodel 2022: Performance Showcase

The New American Remodel 2022 team transformed an old home into a Net Zero thoroughbred while keeping its charm.

What is a Deep Energy Retrofit?

Model ReModel 2022 will undergo a deep energy retrofit—here's how.

Estimating Three Ways

Three remodelers reveal how they estimate a project

10 Criteria to Measure the Health of Your Business

Richardson walks business owners through different areas to reveal necessary insights.

Advertisement
boombox1 -
Advertisement
native1 -

More in Category




Advertisement
native2 -
Advertisement
halfpage1 -