Symbi Homes has completed its solar array design for Model ReModel 2022, which is expected to offset all electricity needs. Symbi Homes is working with local provider Ipsun Solar to specify and install their 6.8 kW system.
With the passage of the Inflation Reduction Act, the federal tax deduction for solar will soon be increasing from 26% to 30%. To purchase and install panels from Ipsun Solar, Symbi's cost is $22,383. After federal and state rebates and incentives, that cost is reduced to $14,668, a savings of $7,715.
In addition, Symbi homeowners will be eligible for annual payments through the State of Maryland Solar Renewable Energy Credit (SREC) Program. Based on solar production, SRECs fluctuate with the market, but Ipsun Solar estimates a payment of $565 per year for the 6.8 kW system.
Read the full piece and follow Model ReModel at the official project site here.
Comments (1)
Add new comment
Related Stories
Model ReModel 2022: A Case Study in Sustainable, Thoughtful Construction
The eighth annual Model ReModel project features an accessory dwelling unit, designed for aging in place, attached to a 19th-century Victorian
Installing a Curbless Shower
Model ReModel 2022 features an ADA-compliant bathroom. The contractor shares the install process
Heat Pump, Air Handler, and Mini Split at Model ReModel
See the components of Model ReModel's high-performance HVAC system
Polished Concrete Flooring Goes In at Model ReModel
To Vent or Not to Vent: A Discussion
In an attempt to strike a middle ground between high-performance and attainable, these three remodelers engage in a candid conversation
Ceiling Insulation and Installation at Model ReModel
Watch the building process of this accessory dwelling unit's vaulted ceiling
Benefits of Continuous Exterior Insulation
Preparing as a Remodeler for the Inflation Reduction Act
Why Blow-In Cellulose Insulation?
Hear why the Model ReModel contractor chose blow-in cellulose and watch the installation
3 Tips for Rough-In Photos
These three quick tips will maximize the usefulness of your rough-in images, ensuring they're helpful for years to come
this article
Submitted by JOE (not verified) on Mon, 08/15/2022 - 17:42
this article
so - round numbers - the customer will get approx 500.00 per yr.. the contractor cost approx 15000.00 plus oh & profit.. 19000.00 installed..
plus the cost of a new roof - because installing these on an existing or older roof is dumb and what happens when that roof needs replacement or leaks..
after 10 yrs the panel output is reduced by half.. 15 yrs basically less than 25% output plus old tech is obsolete - then there is the hazardous waste disposal fees..
so - customer collects 'hopefully' 5000.00 in 10 years after paying 20000.00 for the panels and another 22000.00 for the roof...
42000 - 5000 = 37000.00 in the hole...
yeah... sign me up... dummies..